INERT DETONATORS

Securesearch, Inc. now has available a range of inert non-electric and electric detonators. The electric detonators are complete with bridge wire assembly, accordion-fold leg wires and metal foil shunt on the bare wire ends. The shells come in aluminum or copper.

The bridge wire unit is commercially manufactured for use in live detonators, but contains no match head or flash charge. The detonator shells can be supplied empty or with an inert explosive simulant, which will show up on color monitor x-ray imaging equipment. The bridge wire will also appear on an x-ray image.

The aluminum detonators are available in the following lengths:

• 2.1 inches, imprinted in black, "DANGEROUS / BLASTING CAP / EXPLOSIVE / DANGER / DETONATEUR / EXPLOSIF" or imprinted in orange, "DUMMY / FAUX" with 2 orange bands.

• 2.35 inches (non-electric safety fuse cap), with flared open end, identical to the U.S. special military M7. No imprint.

The copper detonators are available in the following lengths:

• 2.4inches

• 3.025 inches

• 3.9 inches

All the copper detonators carry the same imprint in black, in both English and French, as on the aluminum black-imprinted detonators. (They can also be supplied with the French imprint removed for certain operations. Please indicate this on your order).

None of the above inert detonators have a hole drilled in them. Except for those with the orange imprint, none of the other detonators have on them any indication or marking that they are inert. This makes them suitable for sting operations.

We also carry an assortment of inert Nonel non-electric detonators, all with blue plastic flash tubes. The flash tubes come in 3-foot, 12-foot and 80-foot lengths. Some are available as double-tube/double-cap units with the tubes coiled on plastic spools. All of the Nonel detonators have a 1/8" hole drilled in the tip of the metal shell.

To Order or for Additional Information Please Contact Our Sales Representatives